top of page

megger india

MEGGER has been the premier provider of electric test equipment and measuring instruments for electrical power applications. The trademark was first registered in May 1903 and is jealously guarded by the company. Although we're best known for our world famous range of insulation testers, Megger provides a full service solution to meet your electrical test and measurement needs. Our products provide testing solutions in the most critical maintenance areas including cable fault locating, protective relay testing, and power quality testing. With such a diverse product offering, we are the single source for electrical test and measuring instruments.

Download Catalogue

Megger
INSULATION & CONTINUITY TESTERS

MIT200 series

  • Insulation testing to 1000 MΩ

  • Continuity testing at 200 mA down to 0.01 Ω

  • Live circuit warning (voltage display) and test inhibit

  • Digital/Analogue display

  • Alkaline or rechargeable batteries

  • –10°C to +55°C operating temperature

  • CATIII 600 V

  • Conforms to EN61557-1

◄

1 / 1

►

Please reload

Insulation & Continuity Testers
EARTH RESISTANCE TESTER

DET3TD/DET3TC (Three pole earth electrode tester)

  • 2 and 3 point testing

  • Choice of digital or analog display

  • Warning indicators prevent test failure

  • IP54 rated

  • Complete with leads, stakes and rugged carry case

  • Simple one button operation

  • Calibration test certificate included

 

The DET3 contractor series includes -

  • DET3TC: capable of testing on-site grounds without disconnecting the utility connection

  • DET3TD: for basic requirements it provides digital ground testing and bond test capabilities

◄

1 / 1

►

Please reload

Earth Resistance Tester
DIGITAL LOW RESISTANCE MICRO OHMMETER

DLRO 10 and DLRO 10X (10 A low resistance ohmmeters)

  • NEW interchangeable test lead terminations

  • Auto current reversal cancels standing emfs 

  • Protected to 600 V 

  • Automatically detects continuity in potential and current connections 

  • Multiple operating modes including fully automatic 

  • Alpha-numeric keypad for entering test notes (DLRO 10X) 

  • User selectable high and low limits (DLRO 10X) 

  • Printer output and memory (DLRO 10X)

◄

1 / 1

►

Please reload

Digital Low Resistance Micro Ohmmeter
DIGITAL MULTI-METER

AVO410

  • 6000 count backlit digital display

  • True RMS reading on a.c. mode

  • 1000 V d.c. / 750 V a.c. ranges

  • 10 A a.c. / d.c. ranges

  • Resistance, frequency and capacitance ranges

  • CAT IV 600 V safety rating

AVO210

  • 2000 count digital display

  • 1000 V DC / 750 V AC ranges

  • 10 A AC / DC ranges

  • Resistance, frequency and capacitance ranges

  • Non-contact voltage sense feature

  • CAT III 600 V

Please reload

Digital Multimeter
DIGITAL CLAMP METER

Dcm 310 & 320

  • Option of current only , DCM310 or multimeter, DCM320 models

  • Measures up to 400 A a.c. with low current ranges for improved resolution

  • 600 V a.c./d.c. DCM320

  • 20 MΩ Resistance DCM320

  • Data Hold

  • Max Hold DCM310

  • Small pocket-size design

  • Exceptional battery lifetime

  • Supplied with carry case

  • IEC61010 CAT III 600 V

Please reload

Digital Clamp Meter
RELAY TEST  SET

SVERKER 650 - SINGEL PHASE RELAY TEST KIT

  • Designed for rugged field use

  • 0 to 100 Amp output current

  • Suitable for testing many different types of relays such as power, voltage and current

  • Easy to operate

SVERKER 750/780 - SINGEL PHASE RELAY TEST KIT

  • The engineer’s toolbox for all single phase relay testing!

  • Stand-alone functionality

  • Rugged and reliable for field use

SVERKER 900 - 3 PHASE RELAY TEST KIT

  • The toolbox for substation 3-phase testing

  • Three currents and four voltages

  • Stand-alone functionality

  • Rugged and reliable for field use

  • Generation of 900 V and 105 A in single phase mode

  • Secondary and primary testing

Please reload

Relay Test Set
POWER QUALITY ANALYZER

MPQ1000

  • Auto CT identifies the current clamp that is connected to the analyzer as well as the range to which the CT is set.

  • Configuration verification which identifies and notifies you if the product has been connected incorrectly.

  • On-board data analysis which can compare results against canned or custom standards. Create your own templates for internal your company standards.

  • SD Card Support, USB Card Support, USB Communications as well as Ethernet connections, making it versatile.

MPQ2000

  • Designed for rugged field use

  • 0 to 100 Amp output current

  • Suitable for testing many different types of relays such as power, voltage and current

  • Easy to operate

Please reload

Power Quality Analyzer
CABLE FAULT LOCATION SYSTEMS

EZ-THUMP - Highly Portable Fault Location System

  • Compact, light and rugged field instruments

  • Battery and AC line operation

  • Automatic end-of-cable and fault locating

  • Transflective color display

  • ARM® Prelocation

  • Fault Pinpointing (Thumping)

  • Optional Sectionalizing Software

  • EZ-Thump3 - 0 to 3KV

  • EZ-Thump4 - 0 to 4KV

  • EZ-Thump12 - 0 to 12KV

SFX8-1000 - (2,4,8 KV)

  • Very low voltage levels

  • Complete fault location with DC Testing up to 8 kV

  • Prelocation with ARM and ICE

  • Burning with up to 1.4 

Please reload

Cable Fault Location System
CABLE ROUTE TRACER

EasyLoc

  • Make optimum preparations for your building work, quickly and reliably

  • Avoid cable damage and help to minimise costly accidents and inconvenient delays

  • Depth measurement at the push of a button, even without a transmitter

  • 33 kHz – compatible with other location systems

  • Large display with automatic backlight

  • Quick and simple to operate

CI/LCI

  • Identifies a de-energized primary cable safely

  • Identifies live secondary cables up to 240 VAC

  • Avoids false positives

Please reload

Cable Route Tracer
BATTERY IMPEDANCE TESTER

BITE2/2P

  • Determines condition of lead-acid and NiCd cells up to 7000 Ah

  • On-board Pass/Warning/Fail indications

  • Robust, repeatable instruments

  • On-line testing

BITE3

  • Determines health of lead-acid cells up to 2000 Ah

  • On-line testing with Pass/Warning/Fail calculations

  • Measures impedance, interconnection resistance and cell voltage

  • Windows CE operating system with 32 MB of memory

  • Measures float and ripple currents

  • Includes PowerDB LITE Management Software

Please reload

Battery Impedance Tester

MANISHA

TOOLS & INSTRUMENTS

bottom of page